Remote Control Commands
R&S
®
SMW200A
901User Manual 1175.6632.02 ─ 16
Parameters:
<Format> ASK | BPSK | P2DBpsk | QPSK | QPSK45 | OQPSk | P4QPsk |
P4DQpsk | PSK8 | P8D8psk | P8EDge | QAM16 | QAM32 |
QAM64 | QAM256 | QAM1024 | MSK | FSK2 | FSK4 | USER |
FSKVar | QAM128 | QEDGe | QAM16EDge | QAM32EDge |
AQPSk | QAM4096
*RST: MSK
Example: See Example "Performing general tasks" on page 891
Manual operation: See "Modulation Type" on page 274
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe <Angle>
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
Parameters:
<Angle> float
Range: 0 to 180
Increment: 0.01
*RST: 0
Default unit: Deg
Example:
BB:DM:FORM AQPS
BB:DM:AQPS:ANGL 45
Manual operation: See "Angle Alpha" on page 275
[:SOURce<hw>]:BB:DM:ASK:DEPTh <Depth>
Sets the ASK modulation depth for modulation type ASK.
Parameters:
<Depth> float
Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: PCT
Example:
BB:DM:FORM ASK
BB:DM:ASK:DEPT 50 PCT
Manual operation: See "ASK Depth" on page 275
[:SOURce<hw>]:BB:DM:FSK:DEViation <Deviation>
Sets the frequency deviation when FSK modulation is selected.
SOURce Subsystem
To Next Page
Loading...
