Chapter 5 Operation
5300.9677.71 - 5.14 - EN-4
Fig. 5 Entering IP address
2. From the context menu, select the Edit Offline mode.
3. Enter the parameters IP Address, Subnet Mask, and Gateway in the appropriate
fields.
4. In the context menu, select Submit Changes.
The changes will be made.
Configuring browser
The following requirements must be fulfilled before you can operate the transmitter using
your browser:
– Setting of cookies must be enabled
– Scripting of Java applets must be activated
– "Java Platform Standard Edition" must be installed and activated
The next section uses Microsoft Internet Explorer to explain how you can check whether
these conditions have been met or what changes you need to make.
Note Please note that the settings described here need not match your current browser version
one hundred percent.
All necessary changes and settings can be found in the Tools > Internet Options menu of
your Internet Explorer.
Checking and adapting settings for cookies:
1. Select the Privacy tab and click the Default button if available.
2. Set the privacy level via the slider (all the way down) to Accept All Cookies.
Checking and adapting settings for Java applets:
ATTENTION!
Please note that the modified settings described here may adversely affect the security of
your Internet connections.
To Next Page
Loading...
