Chapter 5 Operation
5300.9677.71 - 5.15 - EN-4
1. Select the Security tab.
2. For the Internet zone, select the Adapt Level option.
3. In the tree structure, go to Scripting > Scripting of Java applets and select the Enable
option.
Installing Java (Sun) JRE if necessary; checking and adapting settings
1. Select the Advanced tab.
2. Check whether the entry Java (Sun) JRE ... is present and enabled.
3. If necessary, download "Java Platform Standard Edition" (including standard installation)
from the Sun website "www.java.com".
4. Then select the Internet Explorer's Advanced tab again and check whether the software
is installed and enabled.
Launching program
1. Start the browser on your PC or client.
Note For error-free operation, enable "Java" and "Cookies" in your browser.
2. Enter the same IP address as you entered at the transmitter.
The login screen appears.
The following standard authorizations will be available to you:
3. Log on using the ID you require and confirm with OK.
The corresponding entry screen appears.
ID Authorization Password
Configuration Allows you to set basic transmitter parameters; e.g. setup 1234
Maintenance Allows you to perform maintenance tasks; e.g. software
update
1234
Operation Allows you to make settings that directly affect transmitter
operation
1234
Query Read-only authorization 1234
Guest Read-only authorization – see Query 1234
Config-Engl Same as Configuration authorization; this ID also
changes the menu language to English (irrespective of
the preset language, e.g. Chinese)
1234
Superuser Allows you to configure, create, and delete user profiles
and to display and delete active sessions; no authoriza-
tion for setting transmitter parameters; see Query
1234
To Next Page
Loading...
