Chapter 5 Operation
5300.9677.71 - 5.68 - EN-4
Entry/display Description
Parameter Set
Load Selecting a parameter set as the current parameter set; the currently
loaded parameter set acts as an independent copy of the stored param-
eter set.
Save Saving the currently active settings to the chosen memory location.
Copy From Selecting a parameter set that you wish to save to another memory loca-
tion. This procedure should only be carried out in Offline mode (context
menu: Edit offline).
Copy To Selecting a memory location to which you wish to copy the parameter
set selected (i.e. copied) above. This procedure should only be carried
out in Offline mode (context menu: Edit offline). Having completed the
procedure, implement any changes via the context menu (Submit
changes).
State
Procedure State Display showing the status of the action that is being carried out (Ready,
Loading, Saving, Copying)
Subdevice Different Yellow: In one of the transmitter components controlled by the R&S
NetCCU800, values are set which deviate from the parameter set cur-
rently selected here.
Values Changed Yellow: The values in the current parameter set no longer agree with
those in the stored original.
To Next Page
Loading...
