Chapter 5 Operation
5300.9677.71 - 5.69 - EN-4
Names
Parameter Set 1 Name to describe the parameter set (e.g. intended use)
Parameter Set 2 See above
Parameter Set 3 See above
Parameter Set 4 See above
Parameter Set 5 See above
Parameter Set 6 See above
Parameter Set 7 See above
Parameter Set 8 See above
Context menu
Reload This reloads the parameter set selected at Load as the current parame-
ter set (current values are overwritten).
Resave This saves the current parameter set again at the memory location
selected at Save (the values already stored at this memory location are
overwritten).
Recopy This is a repetition of the "Copy From / Copy To" procedure. The values
at the memory location to which the copied parameter set is written are
overwritten.
Save Changes Changes made to the current parameter set are saved.
Entry/display Description
To Next Page
Loading...
