Chapter 4 Putting into Operation
5300.9677.72 - 4.23 - EN-4
2. Check the status of the warning and error indicators.If a transmitter is ready to operate,
no warnings or errors will be signaled.
3. Select Transmitter > Exciter > Status > Exciter FM Board.
The Status > Exciter FM Board window opens.
4. Select Transmitter > Exciter > Status > Analog Status.
The Status > Analog Status window opens.
5. Check the status of the warning and error indicators.
6. Select Transmitter > Exciter > Status > Digital Status.
The Status > Digital Status window opens.
To Next Page
Loading...
