Rohde & Schwarz SU 4200 - TX E1 - Communication Data Connector X14 (Reserved); USB Device Connector X20; Fig. 6.9 TX E1 − Communication Data Connector X14 (Reserved); Fig. 6.10 USB Device Connector X20

Interface Description R&S SU 4200
6.9 6125.0226.12.01
6.2.9 TX E1 – Communication Data Connector X14 (Reserved)
RJ-48 (10 pins)
Compatible with RJ-45 (8 pins) cable
Fig. 6.9 TX E1 − Communication data connector X14 (reserved)
ATTENTION
Reserved connector.
Do not connect any signal to connector X14.
The radio may be damaged if any signal is connected.
6.2.10 USB Device Connector X20
USB-B-S-S-B-TH (4 pins)
Fig. 6.10 USB device connector X20
Entry in column D (direction): O = Output I = Input B = Bi-directional
Entry in column T (type): A = Analog D = Digital P = Power
Signal description D T Range Contact Remarks
USB_PWR I P 5 V X20.1
USB– B D According to USB
specification 1.1.
X20.2 USB data minus
USB+ B D According to USB
specification 1.1.
X20.3 USB data plus
GND I P X20.4
Headset connector X21\Headset connector X21 "Radio".doc
2
1
3
4
1
10