Rohde & Schwarz XT 4410A - Page 140

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Special Conditions
– 3.26 – 6076.0822.12.01
 &RQILJXUDWLRQ
 0HQX6<67(0
In Menu 0 (SYSTEM) the User PINs can be changed globally (for details on PIN numbers refer
to chapter 3.6).
+ Press key and key simultaneously.
q The following display appears:
No. Control Action Notes
2 Press softkey PIN
RADIO MAINT.
Abort entry.
Entry of new radio maintenance PIN
1. Enter the RADIO SYSTEM PIN number
by using the numerical keypad, then
press ENTER.
2. Enter new MAINT PIN number by using
the numerical keypad, then press
ENTER.
3. Confirm the new MAINT PIN number by
repeating the entry by using the numeri-
cal keypad, then press ENTER.
3 For entry of a new radio setup PIN follow
the same procedure as described for the
radio maintenance PIN (see softkey 2).
keys MENU HOME and ENT
softkey PIN RADIO SETUP



