065 75$16&(,9(5 ; $ ; $
Operator’s Manual • Use under Special Conditions
6076.0822.12.01 – 3.57 –
4 Press softkey
LOCAL.
Selection of the active PTT line
An "X" then indicates that this line can be
selected by local control only.
The PTT line is only enabled if the radio is
set to LOCAL operation (key on Front
Panel).
5 Press softkey
ACTIVE.
Selection of the PTT level of the current
line
9 Press softkey
SAVE.
Saves the current configuration.
The asterisk (*) indicates that the new set-
tings have not yet been stored.
No. Control Action Notes
To Next Page
Loading...
