Rohde & Schwarz XT 4410A - Page 195

065 75$16&(,9(5  ; 0  ; 0
Operator’s Manual • Use under Special Conditions
6076.0851.12.01 – 3.81 / 3.82 –
12 Press softkey
DISP TIMER.
Set value.
Setting of the display timer in the range of
1 to 60 minutes (display goes blank).
Permitted range of values: 0 to 60 min.
After this timeout the display goes blank.
13 Press softkey
BRIGHT.
Set value.
Setting of the display brightness in per-
cent.
Permitted range of values: 0% to 100%
14 Press softkey
CONTR.
Set value.
Setting the display contrast in percent.
Permitted range of values: 0% to 100%
No. Control Action Notes
Frequency
(MHz)
Channel
spacing
(kHz)
Channel
xxx.0000 25 xxx.000
xxx.0000 8.33 xxx.005
xxx.0083 8.33 xxx.010
xxx.0167 8.33 xxx.015
xxx.0250 25 xxx.025
xxx.0250 8.33 xxx.030
xxx.0333 8.33 xxx.035
xxx.0417 8.33 xxx.040
xxx.0500 25 xxx.050
xxx.0500 8.33 xxx.055