Rohde & Schwarz XT 4410A - Page 244

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Technical Information
– A1.18 – 6076.0822.12.01
Since the power amplifier is deactivated (PA UHF
= OFF), the default values are used for PTT in-
stead of the values configured for AM or FM.
Default values:
AM = 3 W
FM = 5 W
Since the power amplifier is deactivated (PA UHF
= OFF), the default values are used for PTT in-
stead of the values configured for AM or FM.
Default values:
AM = 10 W
FM = 10 W
Since the power amplifier is activated (PA UHF =
ON), the configured values are used for PTT in-
stead of the default values.
Configured values:
AM = 12 W
→ 12 W x gain of VD 480L
FM = 15 W → 15 W x gain of VD 480L