Rohde & Schwarz XT 4410A - Page 72

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Normal Conditions
– 2.12 – 6076.0822.12.02
2.5.1.2.3 Value Selection
q Selection within a set of values (example: power) can be made in different ways:
1. Press the appropriate softkey associated to the relevant display field as many times as
required, selection being made in forward direction. Confirm by pressing the ENTER key.
The previously set value remains highlighted until a new setting is selected and con-
firmed with ENTER.
Example:
2. Select by turning the tuning knob (in either direction). Confirm by pressing the ENTER
key.
Example:
q Numerical values (example: frequency) can be set by using either the numerical keypad
or the tuning knob and the ENTER key.
Example:
and
Softkey
and
Tuning Knob
or
and
and