Rohde & Schwarz ZNB - Connecting a Keyboard; Connecting a Mouse; Connecting a Printer

Putting the Analyzer into Operation
R&S
®
ZNB/ZNBT
17Getting Started 1316.0062.02 ─ 26
2.9.2 Connecting a Keyboard
A keyboard can be connected to any of the USB connectors. After being auto-detected
by the operating system, it can safely be disconnected and reconnected even during
measurements.
Keyboard configuration
The default input language is English – US. Select "Control Panel" > "Clock, Lan-
guage, and Region" > "Region and Language" > "Keyboards and Languages" from the
Windows
®
Start menu to configure the keyboard properties.
To access Windows
®
, press the Windows key on the front panel (R&S ZNB only) or on
the external keyboard.
2.9.3 Connecting a Mouse
A USB mouse can be connected to any of the USB connectors. After being auto-detec-
ted by the operating system, it can safely be disconnected and reconnected even dur-
ing measurements.
Mouse configuration
Select "Control Panel" > "Hardware and Sound" > "Devices and Printers" > "Mouse"
from the Windows
®
"Start" menu to configure the mouse properties.
To access Windows
®
, press the Windows key on the front panel (R&S ZNB only) or on
the external keyboard.
2.9.4 Connecting a Printer
A printer can be connected to any of the USB connectors. After successful installation,
it can safely be disconnected and reconnected even during measurements.
Before printing (SYSTEM > [PRINT]), the analyzer checks whether a printer is connec-
ted and turned on and whether the appropriate printer driver is installed.
Printer driver installation
If necessary, the printer driver installation is initiated using the operating system's "Add
Printer Wizard". The wizard is self-explanatory. A printer driver must be installed only
once.
A great variety of printer drivers is available on the analyzer. To obtain the complete
list, select "Control Panel" > "Hardware and Sound" > "Devices and Printers" from the
Windows
®
"Start" menu.
Connecting External Accessories