Putting the Analyzer into Operation
R&S
®
ZNB/ZNBT
24Getting Started 1316.0062.02 ─ 26
Some actions require a different firewall configuration, e.g.:
●
To transfer data with other hosts in the LAN, you have to allow "File and Printer
Sharing".
To change the firewall settings, proceed as follows:
1.
Access the operating system by pressing the Windows
®
key on the external key-
board. Open the "Control Panel".
2. Select "System and Security > Windows Firewall".
● Select "Change Settings > Allow a program or feature through Windows Fire-
wall" to enable "File and Printer Sharing".
● Select "Turn Windows Firewall on or off" to enable or disable the firewall.
You must confirm a user account control message to allow the desired changes (see
Figure 2-1). For detailed information about the firewall refer to the Windows
®
Help.
Risks of changing the firewall settings
Disabling the firewall or allowing exceptions may make your instrument more vulnera-
ble to viruses and intruders. It is recommended to restore the default firewall configura-
tion after completing a task which requires modified settings.
Remote Operation in a LAN
To Next Page
Loading...
