Instrument Tour
R&S
®
ZNB/ZNBT
25Getting Started 1316.0062.02 ─ 26
3 Instrument Tour
This chapter gives an overview of the control elements and connectors of the
R&S ZNB/ZNBT and gives all information that is necessary to put the instrument into
operation and connect external devices.
3.1 Front Panel R&S ZNB
The front panel of a R&S ZNB consists of the touchscreen with the diagrams and soft-
tool panels (left side), the hardkey area (right side) and the test port area below. Brief
explanations on the controls and connectors, the hardkey area and the rear panel can
be found on the next pages.
Two-port and four-port network analyzers
The figures and examples in this Getting Started guide show a two-port network ana-
lyzer. Everything described in this guide is also valid for four-port analyzers. The exten-
ded measurement functionality of the four-port instruments is described in the help sys-
tem and in the user manual.
Figure 3-1: R&S
ZNB8 with two ports
Front Panel R&S ZNB
To Next Page
Loading...
