Command Reference
R&S
®
ZNB/ZNBT
1055User Manual 1173.9163.02 ─ 54
Parameters:
<Boolean> ON | OFF - logo is included or excluded.
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:LOGO ON; :HCOP
Include the logo in the printed output and start printing.
HCOPy:ITEM:MLISt[:STATe] <Boolean>
Qualifies whether or not the printed output contains the information in the marker info
field (marker list).
Parameters:
<Boolean> ON | OFF - marker list is included or excluded.
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:MLISt ON; :HCOP
Include the marker list in the printed output and start printing.
HCOPy:ITEM:TIME[:STATe] <Boolean>
Qualifies whether or not the printed output contains the current date and time.
Parameters:
<Boolean> ON | OFF - date and time is included or excluded.
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:TIME ON; :HCOP
Include the data and time in the printed output and start printing .
HCOPy:PAGE:COLor <ColorScheme>
Select the color scheme to be used for printing.
Parameters:
<ColorScheme> UDEFined | DBACkground | LBACkground | BWLStyles |
BWSolid | PBWLstyles | PCLBackgrnd | ON | OFF
ON – print with color or grayscale (depending on the printer
capabilities).
OFF – use black-and-white printing using line styles to allow
identification of different traces.
UDEFined
User defined color scheme, previously configured using
DISPlay:CMAP:* commands
SCPI Command Reference
To Next Page
Loading...
