Command Reference
R&S
®
ZNB/ZNBT
1075User Manual 1173.9163.02 ─ 54
Example:
MMEM:LOAD:CMAP 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\ColorSchemes\
Test.ColorScheme'
Load the previously created color scheme file
Test.ColorScheme from the default color scheme directory.
DISP:CMAP13:RGB 1,0,0; :DISP:CMAP14:RGB 0,1,0
Color the first trace red, the second trace green.
MMEM:STOR:CMAP 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\ColorSchemes\
Test.ColorScheme'
Store the data for the user-defined cal kit "Newkit" and overwrite
the cal kit file New_kit.calkit.
Usage:
Setting only
Manual operation: See "Recall... / Save..." on page 695
MMEMory:LOAD:CORRection
<Channel>[, <CalGroupFile>]
Applies a system error correction data set stored in the cal pool (cal group file) to chan-
nel <Channel>.
Parameters:
<Channel> Channel number of an existing channel. ALL applies the
selected data set to all channels.
<CalGroupFile> String parameter to specify the name of the cal group file to be
loaded. Cal group files must have the extension *.cal. The
directory path must not be specified; the analyzer always uses
the default cal pool directory C:\Users\Public\Documents
\Rohde-Schwarz\Vna\Calibration\Data.
Example:
MMEM:STOR:CORR 1,'Calgroup1.cal'
Copy the current correction data set of channel 1 to a cal group
file Calgroup1.cal.
CONF:CHAN2:STAT ON; :MMEM:LOAD:CORR 2,
'Calgroup1.cal'
Apply the stored correction data (cal group file) to channel 2.
MMEM:LOAD:CORR? 2
Query the cal group file for channel 2. Response:
'Calgroup1.cal'
MMEM:LOAD:CORR:RES 2,'Calgroup1.cal'
Resolve the pool link between channel 2 and the cal group file.
MMEM:LOAD:CORR? 2
Query the cal group file for channel 2. Response: ''
MMEM:DEL:CORR 'Calgroup1.cal'
Delete the created cal group file.
Manual operation:
See "Add / Add All... / Replace / Apply / Apply to All"
on page 500
SCPI Command Reference
To Next Page
Loading...
