Instrument Tour
R&S
®
ZNLE
37Getting Started 1323.2873.02 ─ 08
twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded twisted pair, and STP for shielded twisted pair).
For details, see the R&S ZNLE user manual.
4.2.7 LAN
The R&S ZNLE is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). The network card can be operated with a 1
GBit Ethernet IEEE 802.3u interface. Thus, a crossover cable is not necessary
(due to Auto-MDI(X) functionality).
The assignment of the RJ-45 connector supports twisted-pair category 5
UTP/STP cables in a star configuration (UTP stands for unshielded twisted pair,
and STP for shielded twisted pair).
For details, see the R&S ZNLE user manual.
4.2.8 USB
The rear panel provides two additional female USB (3.0 standard) connectors to
connect devices like a keyboard, a mouse or a memory stick (see also Chap-
ter 4.2.8, "USB", on page 37).
4.2.9 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S ZNLE.
It consists of the device order number and a serial number.
Rear Panel View
To Next Page
Loading...
