Getting Started
R&S
®
ZVA
38Quick Start Guide 1145.1090.62 ─ 10
● Use the "Cursor Up" and "Cursor Down" keys and the rotary knob (if rotated) to
scroll up and down in a menu.
● OK ENTER and the rotary knob (if pressed) expand a submenu, open a dialog,
or initiate an action, depending on the selected command type.
● CANCEL ESC compresses the current submenu and moves the cursor one menu
level up or closes the active dialog, depending on the selected softkey type.
3. As soon as you reach the desired menu command (which must not be one opening
a submenu) press OK ENTER or press the rotary knob to initiate an action or open
a dialog.
After command execution or after closing the dialog, the menu bar is deactivated and
the cursor returns to the diagram/softkey area.
To make a selection in a dialog...
1. Press a softkey with three dots to open a dialog.
Basic Tasks
To Next Page
Loading...
