Instrument Construction and Function Description R&S ZVB
1145.1078.82 3.64 E-4
Service Functions
T
he service functions allow you to examine particular circuit sections on specific boards or to make
well-defined settings that would normally change automatically according to the state of the instrument
(e.g. the IF). There are a number of service functions which, if used incorrectly, could cause the
instrument to malfunction. Usually, these functions are disabled. They are enabled only after a code
number (PASSWORD) has been entered.
There are three different service levels:
Service level Password
0 No password necessary
1 894129
2 30473035
System
System Config…
Measurement Wizard [
Print [
\ Internal Reference
External Reference
Preset
GPIB Address…
Service Function…
External Tools [
Service Function
Enter Password:
MENU
To Next Page
Loading...
