R&S ZVB Installing new R&S ZVB Software
1145.1078.82 4.1 E-4
4 Software Update / Installation of Options
C
hapter 4 provides information on updating software, restoring the operating system installation and
installing options. Descriptions accompanying the software update or the options can be included in this
folder as part of Chapter 4.
Installing new R&S ZVB Software
The instrument firmware can be downloaded from the R&S website (www.rohde-schwarz.com). This is a
Microsoft Installation file (.MSI). The file name is ZVAB_XX_YY.MSI for a released version and
ZVAB_XX_YY_BETAZZ.MSI for a test version. This file must be made available to the instrument via a
suitable medium (Memory Stick, USB CD-ROM drive network or Remote Desktop). The instrument
firmware is installed when you double click on the file. The instrument is ready for operation after you
switch off and then switch back on again.
To Next Page
Loading...
