Rohde & Schwarz ZVB 4 - Page 161

R&S ZVB List of ZVB parts including spare parts
1145.1078.82 5.3 E-4
List of R&S ZVB parts including spare parts
The R&S ZVB is constructed in accordance with R&S Design 2000.
Rackmount: 5E 1/1 T350 MOD. 04/05/06/08/09/10/20/21
Overall dimensions: B x H x T: 465.1 x 241.8 x 417.0
Accessories: 19'' Adapter ZZA-511, Stock No. 1096.3290.00
Rackmount: 6E 1/1 T350 MOD. 22
Overall dimensions: B x H x T: 465.1 x 286.2 x 417.0
Accessories: 19'' Adapter ZZA-611, Stock No. 1096.3302.00
Note: The recommended spare parts are marked with an x in the last column.
Table 5-2 List of all R&S ZVB parts and spare parts
Position. Designation Stock No. Number Electrical
Designation
Recommended
spare parts
DRAWING 1145.1010.01 (ZVB BASE UNIT) & 1145.1332.00 (METAL FRAME)
10 ZM FUNDAMENTAL UNIT ZVB
Mod. 04 05 08 09
1145.1290.08 1
11 ZM FUNDAMENTAL UNIT ZVB
Mod. 06 10
1145.1290.09 1
12 ZM FUNDAMENTAL UNIT ZVB
Mod. 14 20 21
1145.1290.20 1
13 ZM FUNDAMENTAL UNIT ZVB
Mod. 22
1145.1290.22 1
14 ZM FUNDAMENTAL UNIT ZVB
Mod. 17 19 23 25
1145.1290.23 1
15 ZM FAN ZVB 1145.2200.00 3 E1 E2 E3 x
16 VS 7985/ISR-M4X8-A4-PA 1148.2652.00 12
17 VS 7985/ISR-M4X6-A4-PA 1148.2646.00 5
18 VS DIN433-4.3-A4 0082.4586.00 17
19 VS 965/ISR-M2.5X6-A4-PA 1148.3288.00 4
100 ZE NETWORK CONTROLLER 1145.3635.02 1 A140 x
105 ZE NETWORK CONTROLLER 1145.3635.02 1 A130 x
110 EE SYNTHESIZER-LS 1302.4025.02 1 A160 x
111 EE SYNTHESIZER-DS 1302.5180.02 1 A160 x
112 EE SYNTHESIZER-LS 1302.4025.20 1 A150 x