R&S ZVB Instrument Construction and Function Description
1145.1078.82 3.15 E-4
Synthesizers
The source signals for the generator signals associated with each port and the LO signal for the mixers
on the receiver boards for each of the reflectometers are generated on the synthesizer board. One or
two individual synthesizers are accommodated on a synthesizer board. There are three different
synthesizer types used in the R&S ZVB models:
LS Synthesizer
to Reflectometer 1
(GEN)
Synthesizer
15.625 MHz to
8025 MHz
Synthesizer
9 kHz to 8GHz
to Reflectometer 2
(GEN)
to Reflectometer 1
(LO)
to Reflectometer 2
(LO)
To Next Page
Loading...
