R&S ZVL GUI Reference
Nwa-Setup Menu
Operating Manual 1303.6580.32-06
267
• T
races i
ndicates the names of all traces assigned to the channel.
Remote control:
CONFigure:CHANnel<Ch>:CATalog?
CONFigure:CHANnel<Ch>:NAME
CO
NF
igure:CHANnel<Ch>:NAME:ID?
CON
Figure:CHANnel<Ch>[:STATe]
Nwa-Setup Menu
The Nwa-Setup menu provides all display settings and the functions to activate, modify and arrange
different diagram areas.
Diagram Areas
A diagram area is a rectangular portion of the screen used to display traces. Diagram areas are arranged
in windows; they are independent of trace and channel settings.
• A diagram area can contain a practically unlimited number of traces, assigned to different
channels (overlay mode); see Traces, Channels and Diagram Areas.
• The traces displayed in the diagram area are listed in the upper left corner.
• The channels for all traces are listed in the lower left corner.
The contents of the diagram areas are explained in section Display Elements. Diagram areas are
controlled and configured by means of the functions in the Nwa-Setup – Display submenu. Moreover the
size of the entire window can be changed by an easy drag-and-drop operation, which is especially useful if
the nework analyzer is controlled via Remote Desktop.
(No direct access via front panel keys)
The Nwa-Setup menu contains the following functions and submenus:
• Display provides functions to delete diagram areas, arrange traces to diagram areas and arrange
the diagram areas in the active window.
• Display Config configures the entire screen and the individual diagram areas.
• Undo reverses the previous operation.
• Redo reverses the action of the Undo command.
• Setup Info displays information on the active setup.
• System Config opens a dialog to define various system-related settings.
• External Tools opens a submenu with various demo setups and editing tools.
Display
The Display submenu provides functions to delete diagram areas, and arrange areas in the active window.
To Next Page
Loading...
