R&S ZVL GUI Reference
SETUP Key
Operating Manual 1303.6580.32-06
298
The TCP/IP Mode configuration field controls how the IP address for the instrument gets assigned (see
also Assigning an IP Address). For the manual configuration mode, the static IP address, subnet mask,
and default gateway are used to configure the LAN. The automatic configuration mode uses DHCP server
or Dynamic Link Local Addressing (Automatic IP) to obtain the instrument IP address.
Changing the LAN configuration is password-protected. The default password reads LxiWebIfc
(notice upper and lower case characters). This password can be changed in the LXI configuration
menu. This password is restored by a Lan Reset (LCI).
The subentries of the Lan Configuration menu open other pages:
• Ping Client provides the ping utility to verify the connection between the instrument and other
devices.
• Advanced LAN Configuration provides LAN settings that are not declared mandatory by the LXI
standard.
To Next Page
Loading...
