R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
428
parameters SOLid | DASHed | DOTTed | DDOTted | DDDotted.
<trace_width>
Optional trace width, only for traces (<Element> > 12).
Range [def. unit] 1 to 20 [–]
*RST values *RST does not affect the color settings; see also description of the Preset
command.
SCPI, Command
Types
Confirmed (with device-specific numeric suffix and parameters), command or
query. The query returns three values between 0 and one, separated by
commas, corresponding to the red, green, and blue color content.
Example:
*RST; DISP:CMAP:MARK ON; CALC:MARK ON
Create diagram area no. 1 (with default trace showing the S-parameter S
21
) and
a marker Mkr 1.
CALC:PAR:SDEF 'TRC2', 'S11'; DISP:WIND:TRAC2:FEED 'TRC2'
Create a new trace named TRC2 and display the trace in diagram area no. 1.
Note that the new trace automatically becomes the active trace.
CALC:MARK2 ON
Assign a marker Mkr 2 to the trace. Both markers are displayed with the same
color.
DISP:CMAP13:RGB 1,0,0; DISP:CMAP14:RGB 0,1,0
Color the first trace red, the second trace green.
DISP:CMAP6:RGB?
Query the marker color. The marker color depends on the settings made in
previous sessions; it is not reset. A possible response is 0,0,0 for black markers.
DISP:CMAP:MARK OFF
Change the marker colors: Mkr 1 turns red, Mkr 2 turns green.
The numeric suffixes <Element> denote the following display elements:
<Element> Display Element
1 Background
2 Text
3 Selected Text
4 Grid
5 Reference Line
6 Same Color for all Markers
7 Horizontal Line / Vertical Range Lines
8 Diagram Title
To Next Page
Loading...
