R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
445
MMEM:NAME 'C:\R_S\instr\user\Print.bmp'; HCOP
Select a file name and start printing to the file Print.bmp.
HCOP:NEXT
Save the hardcopy output into the file Print_001.bmp.
HCOP:NEXT
Save the hardcopy output into the file Print_002.bmp.
HCOPy:ABORt
Aborts a running hardcopy output.
Parameters
None.
*RST value -
SCPI, Command Types
Confirmed, no query
Example:
HCOP:ABOR
Abort printing.
HCOPy:CMAP<Element>:DEFault<numeric_value>
Resets the colors for a hardcopy to the selected default settings.
<Element>
Numeric suffix, not used in this command.
<numeric_value>
DEFault1 – SCREEN COLORS, but background white
DEFault2 – OPTIMIZED COLOR SET
DEFault3 – USER DEFINED color set
*RST value -
SCPI, Command Types
Confirmed, no query
Example:
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a hardcopy.
HCOPy:CMAP<Element>:HSL <hue>,<sat>,<lum>
Defines the color table in user defined colors. To each numeric suffix of CMAP is assigned one or several
picture elements which can be modified by varying the corresponding color setting.
<Element>
Number of the display element. The display elements corresponding to the
numbers 1 to 27 are listed below.
<hue>
tint
<sat>
saturation
<lum>
brightness
To Next Page
Loading...
