R&S
ZVL Getting Started
Basic Tasks
Operating manual 1303.6538.62 - 05 51
3. As soon as you reach the desired menu command (which must not
be one opening a submenu) press ENTER or press the rotary knob
to initiate an action or open a dialog.
After command execution or after closing the dialog, the menu bar is
deactivated and the cursor returns to the diagram/softkey area.
To Make a Selection in a Dialog...
1. Press a softkey or a menu item followed by three dots to open a
dialog.
2. Use the navigation keys and/or the rotary knob to access the
controls in the dialog.
J Press Left Field or Right Field or the cursor keys to switch between
the control elements in a dialog.
J Press the cursor keys to switch between several entries in a list of
alternative or independent settings.
To Next Page
Loading...
