ROHS HS04 - System Operation and Remarks; Virtual Remote Control Mode A;B Operation; System Standby Virtual Remote Control Mode; Operational Remark

6
0 Auto jump function activated/disabled.
/ System activate/standby.
. LED brightness adjustment.
Q Command mode operation.
S Display setting and input signal status.
? Show all commands.
 MODE B：
：：
：
[COMMAND] [DESCRIPTION]
------------------------- -------------------------------------------
1 2 3 4 Currently select input.
- Select previous input.
+ Select next input.
L Select previous input.
R Select next input.
/ System activate/standby.
. LED brightness adjustment.
Q Command mode operation.
S Display setting and input signal status.
? Show all commands.
System Standby Virtual Remote Control Mode A/B Operate description:
 MODE A：
：：
：
[COMMAND] [DESCRIPTION]
------------------------- -------------------------------------------
/ System activate/standby.
Q Command mode operation.
S Display setting and input signal status.
? Show all commands.
 MODE B：
：：
：
[COMMAND] [DESCRIPTION]
------------------------- -------------------------------------------
1 2 3 4 Currently select input and system activate.
- Select previous input and system activate.
+ Select next input and system activate.
L Select previous input and system activate.
R Select next input and system activate.
/ System activate/standby.
Q Command mode operation.
S Display setting and input signal status.
? Show all commands.
Remark:
There are some DVD equipments still have +5V signal output under power off status, it will cause
auto jump and auto scan function abnormal, please disable auto jump and auto scan function to
avoid any abnormal operation.
Rev. D