5. Checking the programming
04
V. Other information
By repeatedly pressing you can see the programming that is saved in the
radiator for each day. Pressing only once shows day one, twice shows day two and so on.
indicates that the radiator is working.
together for 3 seconds to lock the keypad.
Press &
together for 15 seconds to perform a factory reset & clear programming
Press &
Pressing
for 3 seconds while in manual mode will take you to the LCDT contrast
and decrease it by pressing
You can increase the contrast by pressing
Press
to scroll between the three modes.
For comfort mode the
icon will appear and two dots will flash.
For Anti-frost mode the icon will appear and the dot will appear to bounce.
for how to to select Anti-frost or off as default.) Repeat this process for each hour you wish to
program. To finish the programming press
or leave the radiator for 30 seconds
without pressing any buttons.
Use or to move to the first hour you wish to program.
I. Front panel buttons………………………………………………………………….……….01
II. Setting the time & day….…………………………………………………….…………….02
III. Manual operation: Setting the temperature.…..…..………....…………………..02
IV. Automatic operation: 1. The modes: Anti-frost, Economy & Comfort…....02
2. Setting the temperature for Comfort & Economy modes……………………...03
3. Selecting the days for programming…………..….…………………………………..03
4. Selecting the hours…………………………………………………………………………..03
5. Checking the programming……………………………………………………………....04
V. Other information…………………….………………………………………………….......04
I. Front panel buttons
ON/OFF
Menu
Increase temp. / day / time
Decrease temp. / day / time
Manual / Automatic mode
01
K SERIES QUICK PROGRAMMING GUIDE
K SERIES QUICK PROGRAMMING GUIDE
screen. The letters
LCdt
will appear.
For Economy mode the icon will appear and one dot will flash.
For the radiator to be off no icon will appear and the dot will appear to bounce. (See step 4
To Next Page
Need help?
General
