Do you have a question about the Roko Aero NG 4 ML and is the answer not in the manual?
Overview of the aircraft, manual purpose, and safety terms.
Details on aircraft type, construction, powerplant, and dimensions.
Visual representations of the aircraft's overall configuration.
Glossary of terms and acronyms used throughout the manual.
Defines airspeed limits (Vne, Vno, Va, Vfe) and instrument markings.
Engine operating speeds, limits, fuel, oil, coolant, and instrument markings.
Specifies weight limits, center of gravity range, and load factors.
Lists approved maneuvers and kinds of operation, plus other limits.
Steps to handle engine failure during take-off run, take-off, or flight.
Procedures for dealing with smoke and fire on ground or in flight.
Procedures for emergency/precautionary landings and gliding.
Techniques for spin recovery and handling other emergencies like vibration.
Procedures for inspecting the aircraft before flight.
Steps for starting, warming up, and checking the engine.
Procedures for take-off and climbing phases.
Procedures for landing and shutting down the engine.
Data on airspeed indicator calibration and aircraft stall speeds.
Data for take-off run, distances over obstacles, and landing distances.
Performance figures for climb rate, cruise speeds, and endurance/range.
Information on optimum glide speed, crosswind limits, and service ceiling.
Information on the aircraft's safe operating payload range.
Details on equipment and the process for recording weight and balance.
Table showing permitted payload based on crew and baggage weight.
Description of the aircraft's structure and flight control mechanisms.
Details of the engine, propeller, and fuel system components.
Overview of the electrical system, battery, ignition, and avionics.
Identification and description of cockpit equipment and controls.
Guidelines for aircraft inspection periods and maintenance.
Procedures for towing, parking, mooring, and jacking the aircraft.
Instructions for cleaning the aircraft exterior and interior.