Turning the Power On/O
Turning on the Power
1. Turn the volume of this unit all the way down.
Ø
“Adjusting the Volume” (p. 8)
* Also completely turn down the volume of any connected external
devices.
2. Turn the unit’s [
Ā
] switch “ON.”
The power LED is lit, and the display shows the scene screen.
3. If an external device is connected to this unit, power-
on the external device, and then adjust the volume.
Turning o the Power
1. If an external device is connected to this unit, turn o
the power of the connected external devices.
2. Turn the unit’s [
Ā
] switch “OFF.”
* The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
o function). If you do not want the power to be turned o
automatically, disengage the Auto O function (p. 14).
– Unsaved data is lost when the power turns o. Before turning
the power o, save the data that you want to keep.
– To restore power, turn the power on again.
* You might hear some sound when switching the unit on/o.
However, this is normal and does not indicate a malfunction.
Adjusting the Volume
1. Turn the [VOLUME] knob to adjust the volume.
Use your breath for ne control over the volume when playing.
[VOLUME] knob
Adjusts the overall volume.
* The [VOLUME] knob changes both the speaker’s volume and the
volume of sound coming from the headphone jack at the same
time by factory default.
* To adjust the speaker and headphone volumes separately, edit the
Speaker Volume, Output Volume settings in the settings menu.
8
To Next Page
Loading...
