Roland Boss NS-50 User Manual

Guidelines for safe and correct power connection and usage, including adaptor compatibility and cord care.

Recommendations for unit placement to avoid temperature extremes, dust, humidity, vibrations, and electrical interference.

Instructions for cleaning the unit using soft cloths and mild detergents, avoiding solvents.

Advice on protecting the unit from impact, liquids, pressure, and handling malfunctions or foreign use.

Indicators that light when input signals are too high, prior to clipping point.

Adjusts the signal level at which the Noise Suppressor takes effect.

Adjusts the time it takes for sound to decay after the signal drops below the threshold.

Show the operational status and extent of the Noise Suppressor's effect.

Switches the Noise Suppressor effect between 'In' (active) and 'Out' (bypassed).

Indicates when the unit's power is turned on.

Turns the unit's power on or off.

Accepts connection of the supplied AC adaptor.

Accepts an optional footswitch for controlling Reduction In/Out status.

Used for connecting the unit to an amplifier or mixer.

Used for inputting signals from effects units.

Selects the rated input/output level between -10dBm and +4dBm.

Outputs the signal received at the Guitar In Jack to other effects devices.

Jack for connecting a guitar or other instrument.

Describes connection setup for guitars using the effects loop, excluding delay/reverb devices.

Details connection for stereo sources like keyboards, placed at the end of the signal path.