21
Feb. 2005 BR-1200CD
GLOBAL icon
fig.08-260
When this icon is selected
• Reference Pitch in Tuner parameters
• System parameters
• Sync parameters
• MIDI parameters
• Marker parameters
• Scene parameters
• Scrub and Preview parameters
will be initialized and returned to the values they had at the time of purchase.
MIXER icon
fig.08-270
When this icon is selected,
• Track Compressor, EQ, Pan
• Loop Effects
• Input Select
• Recording Mode
will be returned to the values they normally have immediately after Song New
(p. 48) is performed.
EFFECTS icon
fig.08-280
When this icon is selected,
• User patches from all insert effect banks
• Vocal Tool Box user patches
• Mastering Tool Kit user patches
• Speaker Modeling user patches
will be initialized and returned to their values at the time of purchase (i.e., the
values for preset patches).
ALL icon
fig.08-290
When this icon is selected, all global parameters, effect patches, and mixer
parameters will be initialized.
In addition, all data for song markers, Tempo Maps, Sync Tracks, scenes, and
the like will be cleared. The display contrast will also be returned to the factory
default contrast setting.
3. Move the cursor to the icon for the parameters to be initialized and press
[ENTER/YES].
Alternatively, you can push the FUNCTION button below the relevant
icon.
The message “Initialize *** OK?” will appear.
Example:) When GLOBAL icon is selected
fig.08-300d
4. Press [ENTER/YES].
The message “Sure?” will appear.
fig.08-310d
5. Press [ENTER/YES] once again.
The BR-1200CD will start the initialization process. When this process
has finished, the message “Complete!” will appear and you’ll
automatically be returned to the top screen.
Precautions for initialization
• Press [EXIT/NO] if you want to cancel an initialization process.
• In certain cases, the message “Save Current?” will appear during the
initialization procedure, and this indicates that the current song contains
audio that has been newly recorded or edited, or modified parameters
that have not yet been saved. If you want to save your song before
starting the initialization process, press [ENTER/YES]; if this will not be
necessary, press [EXIT/NO]. If you proceed without saving your song,
all of the new recordings, audio edits, and new parameter settings will be
permanently lost.
Initializing the hard disk (Disk
Initialize)
The appropriate settings for the internal hard disk were made before the BR-
1200CD left the factory, so it is ready for immediate use.
If for any reason the hard disk can no longer be written to or read from, or if
you immediately want to delete all data from the disk, you can carry out Disk
Initialize.
• Take care to note that all data on the hard disk is lost when you execute
Disk Initialize. The demo songs programmed at the factory are also
deleted.
• We recommend creating a backup of your data on a CD-R/RW disc or
other media as your situation requires.
1. Press [UTILITY].
The Utility screen will appear.
fig.001-056d
2. Move the cursor to the HDD icon and press [ENTER/YES].
The Hard Disk screen will appear.
To Next Page
Loading...
