80
Using Insert Effects
*1 Setting available when TYPE is set to JB.
This transforms the pickup output of an electro-acoustic
guitar into a richer sound, as though it had been recorded
using a microphone.
Corrects inaccuracies in the pitch.
With certain settings, pitch correct can make the pitch
change in a coarse “stair-step” fashion to produce a
mechanical vocal tone.
*1 Setting available when TYPE is set to SOFT, HARD,
or ELECTRIC.
*2 Setting available when SCALE is set to MAJ (MIN).
*3 Setting available when TYPE is set to ROBOT.
Makes the volume more consistent.
TYPE
Select the type of GUITAR TO BASS processor.
JB The sound of a Fender Jazz Bass.
PB The sound of a Fender Precision Bass.
REAR VOL (Rear Volume) *1
0–100
Sets the volume of the rear pickup. With a
setting of 0, there will be no sound.
FRONT VOL (Front Volume) *1
0–100
Sets the volume of the front pickup. With a
setting of 0, there will be no sound.
TONE
0–100
Adjusts the tone.
LEVEL
0–100
Adjusts the volume.
ACOUSTIC PROCESSOR
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the ACOUSTIC PROCESSOR effect
on/off.
TYPE
Select the type of acoustic processor.
BRIGHT
This is a bright sound that emphasizes the
string resonances.
WARM
This is a warm sound that emphasizes the
body resonances.
BODY
0–100
This adjusts the sound of the body reso-
nances. It controls the tonal warmth that is
distinctive of an acoustic guitar.
LEVEL
0–100
Adjusts the volume.
Parameter/
Range
Explanation
PITCH CORRECT
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the PITCH CORRECT effect on/off.
TYPE
Select the type of PITCH CORRECT.
SOFT The pitch will be corrected smoothly.
HARD The pitch will be corrected quickly.
ELECTRIC
Corrects pitch variation to a stair-step
change.
ROBOT Corrects the pitch to the specified note.
SCALE *1
CHROMATIC
The pitch is corrected to the nearest chro-
matic semitone.
MAJ (MIN)
The pitch is corrected according to the Key
setting.
KEY *2
C–B, Cm–Bm
Specifies the key of the song you’re singing.
NOTE *3
C–B
Fixes the pitch.
GENDER
-10–0–+10
Changes your voice to a masculine or fem-
inine character.
OCTAVE
-1OCT, 0,
+1OCT
Specifies the amount by which the pitch
will change.
DYNAMICS
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the DYNAMICS effect on/off.
DEPTH
0–100
Adjusts the depth of DYNAMICS.
ENHANCE
0–10
Adjusts the depth of the Enhance effect.
Higher settings will give the sound sharper
definition.
BR800_e.book 80 ページ ２０１０年３月２日 火曜日 午後６時４０分
To Next Page
Loading...
