Roland BR-800 - Changing the Tempo; Using [TAP TEMPO] Button to Set the Tempo

94
Playing an Arrangement
Here’s how to change the playback tempo of an
arrangement when you’re in the play screen.
1
Use the CURSOR [ ] [ ] buttons to move the
cursor to the tempo indication.
D_Play_Tempo.eps
2
Use the dial to adjust the tempo.
The arrangement’s playback tempo will change.
You can temporarily change the arrangement playback
tempo by pressing the [TAP TEMPO] button at the desired
timing.
Press the [TAP TEMPO] button at least four times in
succession; the tempo will be set to the timing at which you
pressed the button.
fig.04-290.eps
Changing the Tempo
Using [TAP TEMPO] Button
to Set the Tempo
• The tempo that’s specified for the arrangement
will be temporarily ignored.
• The tempo change is temporary. If you want to
change the tempo of the arrangement and save it,
refer to “Creating an Original Arrangement” (p.
96).
• You can adjust the tempo in a range of 25.0–250.0.
BR800_e.book 94 ページ ２０１０年３月２日 火曜日 午後６時４０分