Roland BR-900CD - Page 4

4
Notice and apology regarding the possibility of data loss, and explanation of recovery method
6. Note the last number (four digits) of the line that is
displayed.
Ex.)
BOSS BR0 Format DISKINFO Ver2.00BR-900 ????
7. On your computer, start up BRWC.
8. In BRWC, select the BR-900CD drive and the song
ending with the number you noted in step 6.
9. In BRWC, click the “Function Select” [Import] button.
10. Use BRWC’s [Track Select] to select the import-
destination track.
11. In BRWC, click the [GO] button.
12. Enter the location, file name, and click [Open (O)].
Importing will begin.
13. Repeat steps 10–12 for each track that you want to import.
14. When importing is completed, press the BRWC’s
[EXIT] button to close the application.
15. On your computer and on the BR-900CD, disconnect
the USB connection.
16. On the BR-900CD, press the [EXIT/NO] button several
times to return to the Play screen.
Restore the backed-up effect
settings and rhythm settings
into the song.
1. Press BR-900CD’s [UTILITY].
2. Select BR-900CD’s “SEL,” then press [ENTER/YES].
3. Select the song ending with the number you noted in
step -6 (the song into which you imported the audio
tracks), and press [ENTER/YES].
4. Press BR-900CD’s [UTILITY].
5. Select BR-900CD’s “USB,” then press [ENTER/YES].
6. Select BR-900CD’s “BACKUP,” then press [ENTER/YES].
Do not select the “IMPORT.”
The BR-900CD and your computer will be connected via
USB.
7. From your computer, open the ROLAND\BR0 folder
within the BR-900CD.
8. Open the SONG????.BR0 folder of the same name as
the song ending with the number you noted in step
-6.
9. Into this folder, copy all of the following files that you
backed up in step -12.
• ARRANGE2.BR0
• DRUMKIT.BR0
• EFFECTS2.BR0
• EFFECTS3.BR0 (*1)
• PATTERN.BR0
• PITCHMAP.BR0
• SONGINF2.BR0
• SOUND???.BR0 (*2)
(*1) The EFFECTS3.BR0 file exists only for songs that were
created by system program version 2.00 or later. With
system program version 1.xx, you won’t need to copy
this.
(*2) If you backed up SOUND???.BR0 files to your
computer in step -12, you must copy all of those
files to the BR-900CD.
10. On your computer and on the BR-900CD, disconnect
the USB connection.
11. On the BR-900CD, press the [EXIT/NO] button several
times to return to the Play screen.
Copyright © 2008 BOSS Corporation
All rights reserved. No part of this publication may be
reproduced in any form without the written permission of
BOSS CORPORATION.
6
UTIL SONG SELECT
[SEL] [NEW] [IN„
5
UTIL USB
‚T] [TRK] [USB]„
USB STORAGE [ ]
Type:BACKUP
5
1
1
BR-900CD