Roland DUO-CAPTURE EX - Mac os X MIDI Settings

Appendix
26
Mac OS X MIDI Settings
Here’s how to congure the MIDI settings for Mac OS X.
1. In the Mac OS X Finder, open the [Applications] folder and then the [Utilities] folder,
and then double-click [Audio MIDI Setup].
2. Use the following procedure to display the “MIDI Studio” window or the “Audio MIDI
Setup” window.
Mac OS X 10.6 or later
2-1. Click [Show MIDI Window] in the [Window] menu.
Mac OS X 10.5 or earlier
2-1. Click the [MIDI Devices] tab.
3. Conrm that [DUO-CAPTURE EX] appears in the “MIDI Studio” window or the “Audio
MIDI Setup” dialog box.
If [DUO-CAPTURE EX] does not appear or if it is grayed out, it means that the DUO-CAPTURE EX is
not being detected properly.
In this case, click the [Rescan MIDI] icon. Also, try turning the DUO-CAPTURE EX o and then on
again.
4. Click the [Add Device] icon once.
One [new external device] icon will appear.
5. Click the added [new external device] icon and then click the [Show Info] icon.
6. Enter “DUO-CAPTURE EX” in the [Device Name]
eld and then click the [Apply] button.
7. Using your mouse, drag and connect the [ ]
[ ] buttons (which represent the input/
output ports of each device) of the existing
[DUO-CAPTURE EX] and the newly added
[DUO-CAPTURE EX] so that they are connected as shown in the gure.