Roland DUO-CAPTURE EX - Advanced USB Driver Settings

Appendix
31
Advanced USB Driver Settings
You can set the input and output audio buer size settings.
Windows
When using Windows 7, USB driver settings cannot be changed while the monitoring function
of Windows is enabled. Turn o the monitoring function (p. 30).
1. Exit all programs that are using the DUO-CAPTURE EX.
2. Open the “Control Panel” and set the display mode as follows.
•
Windows 7
: Icon view
•
Windows Vista/Windows XP
: Classic view
3. Double-click the DUO-CAPTURE EX icon.
The “DUO-CAPTURE EX Driver Settings” dialog box appears.
Setting Explanation
Audio Buer Size
You can adjust the input and output audio buer size.
Decrease the buer size to decrease latency. Increase the buer size if audio drops
out.
* After adjusting the buer size, make sure to restart all programs that are using the
DUO-CAPTURE EX. If using software that has an “audio device test” function, run the
test function.
[Show “README”] Displays the online manual for the USB driver.