This displays the working time of the spindle motor. Use it as a guide for determin-
ing the service life of the spindle unit.
P. 98,"Spindle Maintenance"
Adjustment Menu (Submenu)
P. 85, "Submenus"
You can apply correction for X- and Y-axis movement distances.
Default setting: 100%
Setting range: 99.5 to 100.5%
Executing this menu item performs surface-leveling cutting to adjust the atness
and parallelism of the table surface.
P. 83, "Surface Leveling of the Workpiece Table"
To Next Page
Loading...
