Roland ep-9 - Making Connections and Powering Up

Making the Connections / Powering Up
Before
making
any
connections,
make
sure
you
have
the
power
on
your
instrument
turned
off.
DAMPER SOFT cy LiMaNa) i
if
you
wish
to
use
headphones,
insert
the
plug
into
either
of
the
two
jacks
on
the
front
of
the
instrument
(left
side
of
the
keyboard).
(The
ep-9
can
accommodate
two
sets
of
headphones
at
the
same
time.)
Once headphones are connected to either (or both) of these jacks,
sound
is
no
longer
output
from
the
speakers.
This
makes
it
ideal
for
times
when
you
wish
to
play
without
disturbing
those
around
you
(late at night, for example).
Press the Power Switch to turn the unit on.
(The red indicator will light.)
We are now ready to play the instrument.
Try
selecting
the
different
sounds
by
pressing
the
Voice
Buttons.
PEDAL WNPUT OuTPUT
s : rcke
De Naw
LadONOY S90,
f —}+— Cord Hook
The supplied
AC Adaptor
‘
To the Power Outlet
Connect the supplied AC adaptor and the damper
pedal (DP-6) to the ep-9.
The Cord Hook conveniently allows you to secure
the AC adaptor cord, thus preventing it from acci-
dentally becoming disconnected while the unit is
being played.
bey
POWER
)
mf ON