20
Try Recording Your Performance
4. Use the [Beat] knob to select the time for the song.
The time of the song cannot be changed during or after recording.
fig.6-04
5. Press the [Rec] button to turn on the indicator.
The keyboard is put in record standby mode.
The [Play] button’s indicator flashes.
fig.6-05.e
If you want to cancel the recording, then press the [Rec] button once more to make the
indicator dark.
If you wish to stop the metronome, press the [On/Off] button to make the indicator go
dark.
In the beginning it is probably a good idea to listen to the metronome as you record.
The sound of the metronome is not recorded.
6. Recording will begin when you play a note on the keyboard.
The [Play] button indicator will change from blinking to lit.
Listen to the metronome, and play along with the tempo.
fig.6-06
Instead of playing the keyboard, you can also begin recording by pressing the [Play]
button to make the indicator light. In this case, you will hear a two-measure count before
recording begins.
7. When you are finished recording, press the [Play] button to make
the indicator go dark.
fig.6-07.e
42
3
0
6
Beat
42
3
0
6
RecRec
Press Lit
PlayPlay
Press
Dark
To Next Page
Loading...
