Roland EV-1-WL - Page 39

39
Parameter Value Explanation
DEPTH 0–100
Adjusts the depth of the
chorus eect.
PRE DELAY 0–10ms
Adjusts the time needed
for the eect sound
to be output after the
direct sound has been
output.
WAVE FORM
SIN
Produces a deeper
sense of modulation.
TRI
Produces a typical
chorus eect.
LOW CUT
FLAT,
20.0Hz–
20.0kHz
Sets the frequency at
which the low cut lter
begins to take eect.
When FLAT is selected,
the low cut lter has no
eect.
HIGH CUT
20.0Hz–
20.0kHz,
FLAT
Sets the frequency at
which the high cut lter
begins to take eect.
When FLAT is selected,
the high cut lter has
no eect.
EFFECT LEVEL 0–100
Adjusts the volume of
the eect sound.