Roland Fantom-X6 - Specify the Key Ranges in Which the Piano and Bass will Sound; Adjust the Volume Balance of the Piano and Bass

17
Playing separate sounds with left and right hands (Splits)
In the Performance Layer screen, press [F3 (Key Range)]. The screen lets you specify the key range of
each part.
Adjust the volume balance so that the piano and bass are at the appropriate level respective to each other.
Specify the key ranges in which the piano and bass will sound
Adjust the volume balance of the piano and bass
Specify the key range in which the selected part will sound.
Move the cursor to “Lower” (or “Upper”) and use VALUE dial to set the value,
then press “Set Lower” (or “Set Upper”).
1
2
Bass Piano
Use cursor (up/down) to select part 1 or 2.
Part 1: piano volume
Part 2: bass volume
Use [CURSOR] (left/right) to select a part, use [CURSOR] (up/down)
to select “LEVEL,
” and then use the VALUE dial to adjust the volume.
You can do more with Layers and Splits
You can adjust the effect settings appropriately for each part.
-> Owner’s manual “Editing the Part Settings” (p. 104)
You can specify that the same effect settings as in Patch mode will be used.
-> Owner’s manual “MFX1–3 Source (Multi-Effects 1 Source)” (p. 212)
Fantom-X_HB_e.book 17 ページ ２００５年５月２４日 火曜日 午前１１時１２分