21
Playing a chord with a single finger
The
Chord Memory
function lets you play a specified chord with a single finger.
* In Performance mode, the Chord Memory function will be available for the Part you chose to be played by the
arpeggiator.
Press [CHORD MEMORY] to turn Chord Memory on. Pressing a single note will sound the chord
assigned to that key.
fig.0-15.e
Hold down [SHIFT] and press [CHORD MEMORY] to access the Chord Memory screen. Use the VALUE
dial to select the desired chord.
fig.0-14
You can also register chord forms that you create, and use them in the Chord Memory
function.
→
“Creating Your Own Chord Forms”
(p. 134) in Owner’s Manual
When you strum a chord downward on a guitar, the strings are sounded in order from the lowest to the
highest string. The Fantom-X provides a function that simulates this, sounding the individual notes of the
chord slowly when you play the keyboard softly, or rapidly when you play the keyboard strongly. This is
also effective on piano or strings.Press [F5 (Rolled Chord)] to turn this function on. By default, the chord
is sounded as an up-stroke, but you can also choose down-stroke or alternate between up and down.
→
“Sounding a chord in the order of its notes (Rolled Chord)”
(p. 134) in Owner’s
Manual
Using Chord Memory
Changing the assigned chord
Producing guitar strums (Rolled Chord Function)
CMaj7
Fantom-X_HB_e.book 21 ページ ２００５年５月２４日 火曜日 午前１１時１２分
To Next Page
Loading...
