Roland Fantom-X6 - Modifying the Sound; Changing the Aspects of the Sound that Are Controlled

42
Modifying the sound
You can vary the sound by moving your hand closer to, or further from the
sensor. You can use this to freely control anything from basic effects such as
vibrato to complex combinations that change multiple aspects of the sound.
To activate this function, press [ASSIGNABLE] so the indicator is lit. Placing your hand over the sensor
will control the sound.
fig.2-03
Hold down [SHIFT] and press [ASSIGNABLE] to access a screen that lets you specify the control
assignment.
fig.2-03a
For more details
→ “Assignable” (p. 122) in Owner’s Manual
Procedure
Changing the aspects of the sound that are controlled
Fantom-X_HB_e.book 42 ページ ２００５年５月２４日 火曜日 午前１１時１２分