Roland Fantom-X6 - Synchronizing a Sample to the Sequencer Tempo; Using the Realtime Time Stretch Function; Make Settings for the Sample

76
Synchronizing a sample to the sequencer tempo
The Fantom-X provides a Realtime Time Stretch function. When this
function is used, samples being played from the sequencer or the audio
tracks will stay in synchronization even if you modify the sequencer tempo.
Example: We’ll assume you’re using a sample that was originally performed at BPM=140.
With this sample already loaded into the Fantom-X, here’s how to use the Realtime Time Stretch function.
Specify the sample’s tempo as 140.
If you don’t know the original tempo of your sample, use a metronome (Click) function to measure the
tempo.
Using the Realtime Time Stretch function
Make settings for the sample
In the Sample Edit screen,
press [F1 (Sample Param)].
Move the cursor to “BPM” and set it to 140.
Fantom-X_HB_e.book 76 ページ ２００５年５月２４日 火曜日 午前１１時１２分