Roland FR-3x - Page 19

5. Close the securitv clip to ensure that the
strap cannot come loose.
6. Repeat steps 3~5 for the other strap.
The upp er strap en ds sho uld loo k as follo ws :
7. Slide the lower end of ane strap through the
right holder ring
as shown.
8. Slide the strap end through the upper evelet
of its plastic buckle (see the illustration).
V-Accordion Roland
Bass strap
9. Turn the strap end around and insert it into
the lower evelet. then
pull it tight.
(NOTE]
Yo u may wa nt to adjust the l eng th fi rs t to suit you r prefer-
ence.
10. Slide the plastic clip over the loose and lang
lower strap ends to secure the strap.
11. Repeat steps 7~9 for the other lower strap
end.
Bass strap
T he FR -3x 's bass st rap (u sed to move t he bellows in
a nd o ut) is m ade of fab r ic and fi tted with a velcro
st rip t ha t allows yo u to adj ust its slack .
I
"19