Roland FR-4X - Using the Unit Safely; General Safety Warnings; Handling Precautions; Important Usage Notes

20
Basic Operation of the FR-4x
Operations in the Menu Screen and How to Edit Parameters
As described below, select a parameter from the menu screen and
edit the value.
1. Press the [MENU] button.
The display screen changes as follows.
2. Use the [
K
] [
J
] buttons to select the function group
that you want to edit.
In this example, select “System.”
3. Press the [ENTER/YES] button to enter the “System”
group.
The screen changes as follows.
4. Within the “System” group, use the [
K
][
J
] buttons
to select the parameter or parameter group that you
want to edit.
In this example, select the “Tuning” group.
On the FR-4x, parameters related to each function are organized
into levels in this way.
5. Press the [ENTER/YES] button to enter the “Tuning”
group.
The screen changes as follows.
6. Use the [
K
] [
J
] buttons to select the parameter
whose value you want to change.
In this example, “Transpose” is selected.
7. Use the [–] [+] buttons to change the value.
8. If you want to change another setting in the same
function group, repeat step 6–7.
MEMO
If you want to change a setting in a different function group,
Press [EXIT/NO] to exit the current function group, and then
repeat step 4–7.
9. Press the [EXIT/NO] button several times to return to
the main screen.
You can also return to the main screen by long-pressing the [EXIT/
NO] button.
Assigning a Name
You can assign a name to a user program or a file that you are
exporting.
In the example screen shown above, a user program is being saved.
The first character of the name is selected (the cursor blinks).
1. As necessary, use the [
K
] [
J
] buttons to move the
cursor to the location of the character that you want
to change.
2. Use the [–] [+] buttons to select the character that
you want to change.
3. Repeat step 1–2 to enter the remaining characters.
In the name entry screen, you can use the buttons shown below to
perform the following operations.
Operation Explanation
Right Register button [1]
Switch between uppercase and
lowercase characters.
Right Register button [2]
Switch between alphabetical
characters and numerals.
Right Register button [3] Insert a character.
Right Register button [4] Delete the selected character.