Roland FR-4X - Page 42

42
Working with User Programs
If you selected “ALL”
a. Press the [
J
] button.
The screen indicates the location within the “MyUPG” folder of
the USB flash drive.
MEMO
If there is no “MyUPG” folder, the root folder is shown.
If you want to move to another folder, refer to “How to select
the folder” (p. 36)
b. Use the [–] [+] buttons to select a file that has the
“UPA” file name extension.
0 0
If the file name does not fit in the screen, it scrolls.
c. Press the [
J
] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT/NO] button.
d. Press the [ENTER/YES] button.
The display shows a screen indicating that the import is in
progress.
When the import is completed, the screen indicates “Complete.”
&
If you selected “Bank”
a. Press the [
J
] button.
The DestBank screen appears.
b. Use the [–] [+] buttons to specify the import
destination bank number.
c. Press the [
J
] button.
The screen indicates the location within the “MyUPG” folder of
the USB flash drive.
MEMO
If there is no “MyUPG” folder, the root folder is shown.
If you want to move to another folder, refer to “How to select
the folder” (p. 36)
d. Use the [–] [+] buttons to select a file that has the
“UPB” file name extension.
0 0
If the file name does not fit in the screen, it scrolls.
e. Press the [
J
] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT/NO] button.
f. Press the [ENTER/YES] button.
The display shows a screen indicating that the import is in
progress.
When the import is completed, the screen indicates “Complete.”
&
If you selected “Single”
a. Press the [
J
] button.
The DestBank screen appears.
b. Use the [–] [+] buttons to specify the import
destination bank number.
c. Press the [
J
] button.
The Dest Num screen appears.
d. Use the [–] [+] buttons to specify the import
destination user program number.
e. Press the [
J
] button.
The screen indicates the location within the “MyUPG” folder of
the USB flash drive.
MEMO
If there is no “MyUPG” folder, the root folder is shown.
If you want to move to another folder, refer to “How to select
the folder” (p. 36)
f. Use the [–] [+] buttons to select a file that has the
“UPG” file name extension.
0 0
If the file name does not fit in the screen, it scrolls.
g. Press the [
J
] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT/NO] button.